Nikon Coolpix S50c - Manual (Page 91)

77
Co
nnec
ting to T
ele
visi
ons,
Com
put
er
s, a
n
d
Pri
n
ters
Connecting to a Computer
Use the supplied audio video/USB cable to connect the camera to a com-
puter, and copy (transfer) pictures to a computer with the supplied Picture-
Project software.
Before Connecting the Camera
Installing PictureProject
Before transferring pictures or movies to a computer, PictureProject must be
installed. For more information on installing and using PictureProject, see the
Quick Start Guide or the PictureProject Reference Manual (on CD).
Confirming USB Option
The following two methods can be used to transfer pictures from the camera
to a computer:
• Click [Transfer] in PictureProject.
• Press E (d) on the camera.
The method used will depend on your computer’s operating system and the
USB option selected in the camera’s setup menu.
1
Refer to the Nikon website for the latest information on operating system
compatibility.
2
This camera supports the USB options, [PTP] (default setting) and [Mass storage].
3
The camera’s E (d) button cannot be used to transfer pictures when the memory
card write-protect switch is in the “lock” position. Use [Transfer] in PictureProject.
To use E (d) on the camera, unlock by sliding the switch to the “write” position
before transferring pictures.
4
If your computer is running Windows 2000 Professional, be sure to set the USB
option to [Mass storage]. If [PTP] is selected, the [Found New Hardware Wizard] will
be displayed when the camera is connected to the computer. Select [Cancel], close
the window, and disconnect the camera from the computer.
j
Note on Power Source
When connecting the camera to a computer, use a fully charged battery to prevent the cam-
era from turning off unexpectedly.
Operating system
1
USB mode
2
E (d)
on the camera
3
[Transfer] in PictureProject
Windows Vista (32-bit HomeBasic/
HomePremium/Business/Enterprise/
Ultimate editions)
Choose
[Mass storage].
Choose [PTP] or [Mass storage].
Windows XP
(Home Edition/Professional)
Choose [PTP] or [Mass storage].
Windows 2000 Professional
4
Choose [Mass storage].
Mac OS X (Version 10.3.9, 10.4.x) Choose [PTP]. Choose [PTP] or [Mass storage].