Nextar Ma828 User Manual
Page 12
9. ConVerTInG ACT FIleS To wAV
Files recorded into the player in ACT format
can be changed into WAV format with the
program that was installed from the included
CD:
1). Run “Sound Converter”, click “open”
2). Choose the ACT files you want to
change
3). Click “Transform” to start transforming to
WAV files
In addition to transforming ACT files into
WAV files, this tool can also play files of WAV
and MP3. Note that you should move these
ACT files from your player to your PC (using
the files transfer instructions from earlier in
this manual) before converting.
10. SYSTeM SeTuP
how To enter Player Setup Mode
Set system parameters here. These will need
to be reset after every firmware upgrade
1). Enter main menu.
2). Dial Next to choose “System setup”.
3). Press Mode to enter “System setup”.