Netopia 3356-ENT - Manual (Page 24)

6-2 Getting Started Guide
Quick Easy Setup Connection Path
This section may be all you need to do to configure your Netopia 4-por t ADSL Router. Your ser vice provider will
supply you with several parameter values. Below is a handy checklist:
ADSL Line Configuration Screen
Trellis Coding Enabled
❑
On (default) or ❑
Off
Fast Retrain Enabled
❑
On (default) or
❑
Off
Data Link Encapsulation
❑
RFC1483 (default) or ❑
PPP
Data Circuit VPI
Data Circuit VPI 0-255 (8 is default)
0-65535 (35 is default) _______________________
_______________________
Easy Setup Profile Screen
Underlying Encapsulation
❑
None (default) or ❑
PPPoE
RFC1483 Mode:
❑
Bridged 1483 (default) or ❑
Routed 1483
PPP Mode:
❑
VC Multiplexed (default) or ❑
LLC SNAP
(for PPP DLEs only)
PPP Authentication:
❑
None (default),
❑
PAP or ❑
CHAP
(for PAP or CHAP)
User Name (or Host Name):
_______________________ (for PAP or CHAP)
Password (or Secret):
_______________________
Address Translation
Enabled:
❑
Yes (default) or
❑
No
IP Addressing:
❑
Numbered (default) or ❑
Unnumbered
(for Numbered IP Addressing)
Local WAN IP Address:
_______________________
Local WAN IP Mask:
_______________________ (for Unnumbered IP Addressing)
Remote IP Address:
_______________________
Remote IP Mask:
_______________________
IP Easy Setup Screen
Ethernet IP Address:
Ethernet Subnet Mask:
_______________________
_______________________
(192.168.1.1
255.255.255.0
are defaults)
Domain Name: _______________________
Primar y Domain Name
Ser ver:
_______________________
Secondar y Domain Name
Ser ver:
_______________________
Default IP Gateway: _______________________
Easy Setup Security Configuration Screen
Write Access Name: _______________________ Write Access Password: _______________________