Tilt, Remove monitor stand for mounting – NEC LCD1550V User Manual
Page 9
Advertising
English-8
Tilt
Grasp both sides of the monitor screen with your hands and adjust the
tilt as desired (Figure TS.1).
Remove Monitor Stand for Mounting
To prepare the monitor for alternate mounting purposes:
1. Remove the connector cover and cable cover (Figure R.1).
2. Disconnect all cables.
3. Place monitor face down on a non-abrasive surface (Figure R.2).
Vacation Switch
Power Button
Figure C.1
1550V
Figure D.1
Connector cover
Cable cover
Clip B
Advertising