NordicTrack NTL14940 - Manual (Page 6)

ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver , wire cutters , and rubber mallet .
Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a
small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal
condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off
the lubricant with a soft cloth and a mild, non-abrasive cleaner.
For help identifying the assembly hardware, see the PART IDENTIFICATION CHART on page 31.
1. With the help of a second person, carefully raise the
Uprights (69) to the position shown.
See the inset drawing. Insert one of the Extension Legs
(102) into the treadmill as shown. Make sure that the
Extension Leg is turned so the Base Pad (99) is under-
neath it. Note: It may be helpful to tip the Uprights (69)
forward and tap on the Extension Leg with a rubber mal-
let as you insert the Extension Leg.
Insert the other Extension Leg (not shown) in the same
way.
69
99
102
69
1
6
2. Press the Lock Knob Sleeve (70) into the left Upright (69).
Remove the Lock Knob (68) from the Lock Pin (74). Make
sure that the Lock Pin Collar (72) and the Spring (71) are
on the Lock Pin.
Insert the Lock Pin (74) into the Lock Knob Sleeve (70)
and the left Upright (69). Tighten the Lock Knob (68) back
onto the Lock Pin.
69
70
68
71
72
74
2
3. Fold the treadmill into the storage position (see HOW TO
FOLD THE TREADMILL FOR STORAGE on page 26).
Orient the Left Rear Foot (140) and the Right Rear Foot
(141) as shown. Attach the Left and Right Rear Feet to
the Frame (110) with four 1” Tek Screws (148). Be care-
ful not to overtighten the Screws.
Lower the treadmill Frame (110) (see HOW TO LOWER
THE TREADMILL FOR USE on page 26).
148
148
140
141
110
3