Nokia 2118 - Manual (Page 43)

S e t t i n g s
Copyright © 2005 Nokia. All rights reserved. 35
Save information
1. In the standby mode, select Menu >
Settings > Call settings > Calling
card .
2. Enter your security code, and
select OK .
3. Scroll to one of the four memory
locations, and select Options >
Edit > OK > Dialling sequence .
4. Select one of the following
sequence types:
Access no. + phone no. + card no.
— Dial 0-800 access number,
phone number, then card number
and PIN, if required.
Access no. + card no. + phone no.
— Dial 0-800 access number,
card number and PIN, if required,
then phone number.
Prefix + phone no. + card no. —
Dial the prefix (numbers that
must precede the phone number)
and phone number you want to
dial, then card number and PIN, if
required.
5. Enter the required information
(access number or prefix and card
number), and select
OK to
confirm your entries.
6. Select Card name .
7. Enter the card name, and select
OK .
Contact your calling card company
for more information.
Make calls
After you have saved your calling card
information in your phone, you can
make a call using your calling card.
1. In the standby mode, select
Menu > Settings > Call settings >
Calling card .
2. Enter your security code, and
select OK . (See ”Access codes” on
page 40 .)
3. Scroll to the calling card of your
choice, and select Options > OK .
4. Press the end key to return to
standby mode; then enter the
phone number, including any
prefix (such as 0 or 1) that your
calling card may require when
you make a calling card call. See
your calling card for instructions.
5. Press and hold the call key for a
few seconds until Card call is
displayed.
6. When you hear the tone or
system message, select OK .
Data or fax calls
Data or fax calls is a network service.
See
”Network Services” on page vii
for more information.