Numark Industries DM1635 - Manual (Page 20)

Professional Disc Jockey Products
Warranty and Service Information
Numark Industries, LLC and Numark International, Inc. (hereafter “Numark”)
warrants each new product manufactured and/or supplied by it to be free from
defects in material or workmanship under conditions of normal use and service for
360 days, beginning on the date of purchase from an authorized Numark Dealer,
but not to exceed 2 years from date of shipment by Numark.
The Numark obligation under this warranty is limited to repairing or replacing, at
its option, the product or part(s) therein; which upon examination by Numark shall
appear to be defective or not up to factory specifications; providing the Numark
product is returned (transportation prepaid) to Numark.
Numark shall not be liable for any damages, consequential or otherwise,
resulting from the use and operation of this product and makes no other warranty(s)
either express or implied on this product, including any warranty of merchantability.
This warranty does not extend to any of our products which have been
subjected to misuse, neglect, accident, incorrect wiring not our own, improper
installation, or use in violation of instructions furnished by us, nor extended to units
which have been repaired or altered outside of our factory, nor to cases where the
serial number thereof has been removed, defaced, or changed, nor to accessories
used therewith not of our own manufacture. Numark reserves the right to make
changes or improvements in its products, during subsequent production, without
incurring the obligation to install such changes or improvements on previously
manufactured equipment.
To place this warranty into effect, the enclosed WARRANTY REGISTRATION
CARD must be returned to Numark Industries, LLC within thirty (30) days after
date of purchase.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Some states do not allow the exclusion or limitation of incidental or
consequential damages so the above limitation or exclusion may not apply to you.
EQUIPMENT TRANSPORT
A Return Authorization number should be obtained from Numark through the
addresses or phone numbers below.
It is the customer’s obligation, when returning faulty equipment, to properly
pack the Numark equipment in its original packaging. Failure to do so may
inadequately protect the equipment in transit and, therefore, jeopardize the
customer’s warranty. The defective Numark equipment should be sent, FREIGHT
PREPAID with Return Authorization number to:
NUMARK INDUSTRIES
11 Helmsman Road
North Kingstown, RI 02852 USA
Attention: Service Department
Telephone: + 1 ( 4 0 1 ) 2 9 5 - 9 0 0 0
Fax:
+ 1 ( 4 0 1 ) 2 9 5 - 5 2 0 0
E-mail: [email protected]