Numark Industries VJ01 - Manual (Page 3)

3
Front Panel
1.
Menu Navigation Controls: Controls to
navigate through the menus on a DVD.
2. Playback control: Contains Play,
Pause, Cue, Fast Forward, Rewind, Next
Track, Previous Track, Slow Motion and
the Program Function.
3. Pitch Fader: Adjusts the playback
pitch/tempo. This feature can be
disabled by pressing the Pitch button
located at (3b).
4. Menu: Opens the menu system of a
compatible DVD.
5. Setup: This button will enter the DVD
player setup mode on the screen which
can be navigated by the ‘Menu
Navigation Controls.
6. Title: Goes to the title menu of
compatible DVD discs.
7. Subtitle: Turn subtitles on and off.
8. Function buttons: These features add
functionality to the DVD Player and are
described later in this manual.
9. Display: The DVD is displayed here.
10. Headphone Gain: Use this knob to
adjust headphone volume.
11. Pitch Bend: Use these buttons to
momentarily change the speed of a DVD.
12. Loop: This button allows you to loop a
section of a DVD. Press it once to set
the beginning of the loop, then press it
again to set the end point of the loop.
13. Open/Close: Opens and closes Disk
Tray. BE SURE TO ALWAYS USE
BUTTON TO OPEN AND CLOSE.
Rear Panel
14. S-Video Output: Output to compatible S-Video monitoring device.
15. Composite Video Output: Output to compatible video monitoring device.
16. RCA Audio Stereo Output: Plug into audio mixer or amplifier.
17. Coaxial Digital Audio Output: Commonly known as SPDIF, connect to compatible SPDIF decoder.
18. IEC Power Connector: Connect your supplied power cable here.
19. Power Switch: Use this to turn the unit on and off.