Navigon MN4 - Manual (Page 68)

User's manual BLUE Edition
Appendix - 66 -
5.1 Configuration of MobileNavigator
Configuration In MobileNavigator, you may modify the following settings:
Map information, see below.
Route information, see page 67.
Volume, see page 67.
Representation, see page 68, see page 69.
Touch screen calibration, see page 68
Auto mode, see page 68.
Speed profile, see page 69.
Itinerary, see page 69.
Time zone, see page 69.
Itinerary, see page 69.
Format, see page 69.
Home address, see page 70.
Radio-Mute, see page 70
On the main screen, tap the Settings button to configure
MobileNavigator.
On the S
ETTINGS
screen, tap the Save button to apply your
modifications if you have made some.
5.1.1 Map information
Info on the map On the I
NFO ON THE MAP
screen, you may effect the following
modifications:
Element Signification
Info bar
The Info bar at the bottom of the map
displays the the compass, the current
height above sea level, and the current
speed.
Tap the respective command button to
display (Yes) or not (No) the Info bar.
Special
destinations Tap the respective command button to
display (Yes) or not (No) Special
destinations on the map.
Street names Tap the respective command button to
display (Yes) or not (No) Street names on
the map.