NAD C515BEE - Manual (Page 6)

INTRODUCTION
getting Started
UNPACKING AND SETUP
what’S in the box
Packed with your C 515BEE you will find:
• An audio cable connector
• The CD 7 remote control with 2 (two) AAA batteries
• This owner’s manual
Save the packaging
Please save the box and all of the packaging in which your C 515BEE
arrived. Should you move or otherwise need to transport your C 515BEE,
this is by far the safest container in which to do so. We’ve seen too many
otherwise perfect components damaged in transit for lack of a proper
shipping carton, so please: Save that box!
chooSing a location
Choose a location that is well ventilated (with at least several inches to
both sides and behind), and that will provide a clear line of sight, within
25 feet/8 meters, between the C 515BEE’s front panel and your primary
listening/viewing position. This will ensure reliable infrared remote control
communications. The C 515BEE generates a modest amount of heat, but
nothing that should trouble adjacent components. It is perfectly possible to
stack the C 515BEE on top of other components.
note on inStallation
IMPORTANT! Install the C 515BEE Compact Disc player on a level, vibration-
free surface. Severe vibration or operation in a tilted position may cause
the player to mis-track. The player may be stacked with other stereo
components, as long as there is adequate ventilation around it. If the
C 515BEE is placed in close proximity to a radio tuner (AM or FM), a VCR or
a television set, the operation of its digital circuits may produce static that
would interfere with reception of weak broadcast signals. If this occurs,
move the C 515BEE away from other devices or switch it off when viewing
or listening to broadcasts.
QUICK START
In case you simply cannot wait to experience the performance of your new
NAD C 515BEE, we provide the following “Quick Start” instructions to get
you underway.
Please make all the connections to your C 515BEE with the unit unplugged.
It is also advisable to power-down or unplug all associated components
while making or breaking any signal or AC power connections.
plaY a cd
1 Connect a twin RCA-to-RCA lead from the L (left) and R (right) Line
Output jacks to the corresponding CD inputs on your amplifier.
2 Plug in the AC power cord.
3 Press the POWER button to turn ON the player.
4 Press [OPEN/CLOSE] to open the disc drawer.
5 Place a CD, label side up, in the tray’s circular recess. Be certain that the
disc is centered within the recess.
6 Press [PLAY]. The drawer closes automatically, and the disc begins to
play.
7 At any time you may press [SKIP or ] to select different tracks on
the disc.
8 Press [PAUSE] if you want to stop play temporarily while keeping the
pickup at its current position on the disc. Press [PAUSE] again or [PLAY]
when you want to resume playback. Press STOP if you want to end play
and reset the pickup to the beginning of the disc.
6
EN
G
LIS
H
FR
A
N
Ç
A
IS
ES
PA
Ñ
O
L
IT
A
LIA
N
O
D
EU
TS
CH
N
ED
ER
LA
N
D
S
SV
EN
SK
A
РУ
СС
К
И
Й
C515BEE_eng_OM_v05.indd 6 22/9/07 18:27:48