Nikon DSR-1500AP User Manual

Page 60

Advertising
background image

60

Menu Contents

C

h

ap
te

r 4

M
e

nu
S
e

tti

n

gs

AUTO EE SELECT [> Auto EE]:

Determine whether the unit
enters EE mode or PB mode
when audio and video
signals from other equipment
are input.
When this unit is used as the
recorder for cut editing, it is
possible to output the input
audio and video signals to
the monitor. This enables
editing operation to be
carried out using a single
monitor.

CASSETTE OUT [>>

Cass. out]: Operations
when the cassette has
been ejected

*

EE [>>> EE]: Output video and audio signals received from

other equipment.

PB [>>> PB]: Mute video and audio signals.

F. FWD/REW [>> F. FWD/

REW]: Operations
when in fast forward or
rewind mode

EE [>>> EE]: Output video and audio signals received from

other equipment.

*

PB [>>> PB]: The unit enters playback mode and outputs a

playback video signal. Audio signals are muted.

STOP [>> STOP]:

Operations when in
stop mode

EE [>>> EE]: Output video and audio signals received from

other equipment.

*

PB [>>> PB]: The unit enters playback mode and outputs a

still picture.

STANDBY OFF [>> STBY

OFF]: Operations
when in standby off
mode

EE [>>> EE]: Output video and audio signals received from

other equipment.

*

PB [>>> PB]: The unit enters playback mode and outputs a

still picture.

LOCAL ENABLE [> Local ENA]: Select which of the tape

transport control buttons (EJECT, REW, PLAY, F FWD,
STOP, and REC) operate when the LOCAL/REMOTE
switch is set to “REMOTE.”

ALL DISABLE [>> All DIS]: All of the tape transport control

buttons are disabled.

*

STOP & EJECT [>> STOP&EJ]: Only the STOP and EJECT

buttons are enabled.

ALL ENABLE [>> All ENA]: All of the tape transport control

buttons are enabled, and settings such as preroll time
change or time data display selection are effective.

REC FORMAT [> REC FMT]: Select the recording format.

*

DVCAM [>> DVCAM]: DVCAM format

DV (SP) [>> DV (SP)]: DV (SP) format

REC INHIBIT [> REC INH]: Determine whether to prohibit

recording on tape.

*

OFF [>> OFF]: Do not prohibit recording on tape.

ON [>> ON]: Prohibit recording on tape. (The REC INHI

indicator in the display section lights.)

SEARCH ENABLE [> Search ENA]: Select whether to enable

playback in shuttle/jog mode by the use of the arrow
(fFgG) buttons.

*

DISABLE [>> DISABLE]: Do not enable.

ENABLE [>> ENABLE]: Enable.

MAX SRCH SPEED [> Max

SRCH]: Specify the
maximum tape speed in
search (shuttle) mode and F.
FWD (fast forward)/REW
(rewind) mode.

SHUTTLE [>> SHUTTLE]:

Specify the maximum
tape speed in search
(shuttle) mode.

X60 [>>> X60]: Maximum 60 times normal speed
*

X32 [>>> X32]: Maximum 32 times normal speed

X16 [>>> X16]: Maximum 16 times normal speed

F. FWD/REW [>> F. FWD/

REW]: Specify the
maximum tape speed
in F. FWD/REW mode.

MAX [>>> MAX]: No maximum tape speed is specified.
*

X85 [>>> X85]: Maximum 85 times normal speed

X60 [>>> X60]: Maximum 60 times normal speed
X32 [>>> X32]: Maximum 32 times normal speed

Note

When this item is set to MAX, the playback video signal is
muted.

PREROLL TIME [> Preroll]: Set the preroll time.

15 SEC [>> 15 sec] to 0 SEC [>> 0 sec]: The preroll time can

be set in one-second increments to between 0 and 15
seconds.

A preroll time of at least 5 seconds is recommended when
using this unit for editing. When an editing control unit such as
the PVE-500 has been connected, this setting is disabled and
the setting on the editing control unit is in effect. Operations
such as the preroll time setting and the time data switching
operation are also performed on the editing control unit.
Factory default setting: 5 SEC [>> 5 sec]

AFTER CUE-UP [> After CUE]: Select the operating mode

following cue-up.

*

STOP [>> STOP]: Stop mode

STILL [>> STILL]: Output still pictures in search mode.

OPERATIONAL FUNCTION [Operational]: Operation
settings

Description of settings

Advertising
This manual is related to the following products: