Nostalgia Electrics Retro RSM-602 - Manual (Page 4)

ENGLISH 3
INTRODUCTION
The RETRO SNOW CONE MACHINE
is easy to use, just follow these simple
instructions.
After Taking the Unit Out Of the Box
1. Your RETRO SNOW CONE MACHINE
is already fully assembled, but has three
separate bonus pieces.


1 side cone shelf

2 plastic cone holders (Paper cones not provided)

1 plastic shaved ice scoop
2. Before first use, lift off the clear safety power control lid, and remove the ice shaving
canister. Remove the top housing lid off of the body and wipe clean the inside of
the shaved ice collection chamber with a non-abrasive moist sponge, towel or cloth
and then dry with a non-abrasive soft towel or cloth.
BREAKDOWN of parts ILLUSTRATION A
E. Shaved
Ice
Collection
Chamber
A. Housing Top lid F. Ice Feed
insert
B. Cone Holders
G. Ice shaving
Canister
C. Shaved ice scoop
H. Locking
cap for
Ice shaving
canister
D. Side cone shelf
H. Clear
Safety power
control lid
3. After cleaning the inside of the shaved ice collection chamber, put the housing top
lid back on the ice collection chamber and base unit.
4. Locate the Ice Shaving canister. Unscrew and remove the center locking cap (This
cap has “LOCK and UNLOCK” with directional arrows, clearly marked on the top)
Separate the Ice Feed Insert from the Ice Shaving Canister. Carefully wash these
parts in warm soapy water. Use extreme caution when cleaning and handling the
Ice Shaving Canister. Blades are very sharp! Rinse and dry with a soft clean cloth.
Reassemble the Ice Shaving Canister and lock the center locking cap securely.
Return the Ice Shaving Canister to the receptacle hole in the top housing lid. Wash
and dry the Clear Safety power control lid, and reposition over the Ice Shaving
Canister.
5. Attach the Side Cone Shelf. NOW, you are ready to enjoy cool, refreshing icy
snacks from your RETRO SNOW CONE MACHINE™.