NETGEAR FS 524S - Manual (Page 57)

1-1 index
A
Applications
Desktop Switching, 3-1
Segment Switching and Bridging
from Mbps to 100 Mbps, 3-2
Stacked Switching, 3-2
Applying AC Power, 4-9
Auto Uplink (FS517TS Only), 2-5
C
Cabling guidelines
Fast Ethernet Cable Guidelines, C-1
Category 5 Cable, C-2
Category 5 Cable Specifications, C-3
Twisted Pair Cables, C-3
Patch Panels and Cables, C-5
Using 1000BASE-T Gigabit Ethernet
over Category 5 Cable, C-5
Cabling, C-6
Length, C-6
Return Loss, C-6
Near End Cross Talk (NEXT), C-7
Patch Cables, C-8
Conclusion, C-8
Checking the Installation, 4-8
Connecting Devices to the Switch, 4-4
Connecting Switches to the
Stack’s Backplane, 4-5
Connector pin assignments
RJ-45 Plug and RJ-45 Connector, B-1
Customer Support, iv
D
Date Rate, A-1
Desktop Switching, 3-1
F
Fast Ethernet Cable Guidelines, C-1
Features, 1-2
Front and Back Panels, 2-1
Front Panel RJ-45 Gigabit Port
(FS517TS Only), 2-5
I
Installation
Preparing the Site, 4-1
Installing the Switch, 4-3
Installing the Switch on a
Flat Surface, 4-3
Installing the Switch in a Rack, 4-3
Connecting Devices to the Switch, 4-4
Connecting Switches to the
Stack’s Backplane, 4-5
Checking the Installation, 4-8
Applying AC Power, 4-9
Interface, A-1
L
LED Descriptions, 2-4
N
Near End Cross Talk (NEXT), C-7
Network Protocol and
Standards Compatibility, A-1
Normal/Uplink Push Button
(FS524S Only), 2-5