Danger, Ow to, Onnect the – NordicTrack CTL8250 User Manual
Page 11: Readmill
![background image](/manuals/190505/11/background.png)
10
HOW TO CONNECT THE POWER CORD
This product must be grounded. If it should malfunc-
tion or break down, grounding provides a path of least
resistance for electric current to reduce the risk of
electric shock.
This product is for use on a dedicated, 20-amp,
120-volt circuit. No other appliance should be on the
same circuit. This
product is
equipped with a
cord having an
equipment-ground-
ing conductor and
a grounding plug.
Plug one end of
the cord into the
treadmill as shown
in drawing 1.
Plug the grounding plug into to a standard NEMA 5-20
receptacle as shown in drawing 2. Do not modify the
plug or the receptacle. Do not use an adapter, a surge
protector, or an extension cord.
HOW TO CONNECT A CATV CABLE
If your treadmill has the Workout TV console or the
iFIT.com console, a CATV cable must be connected
to the treadmill for cable TV stations to be viewed.
Locate the cable
jack on the front of
the treadmill.
Connect the CATV
cable to the cable
jack.
HOW TO CONNECT NETWORK WIRING
If your treadmill has the iFIT.com console, network
wiring must be connected to the treadmill for the con-
sole to be able to access the internet.
Locate the network
jack on the front of
the treadmill.
Connect a network
wire to the network
jack.
DANGER:
Improper connection
of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service-
man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the product—if it will
not fit the outlet, have a proper outlet
installed by a qualified electrician.
H
OW TO
C
ONNECT THE
T
READMILL
1
Cable Jack
Network Jack
NEMA Receptacle
2