Niles Audio IW650FX - Manual (Page 11)

Figure 7. Installing unit into a wall.
������������
Rear View
Front View
9
Figure 6. Connecting a loudspeaker
wire to the terminals.
(CONTINUED ON NEXT PAGE)
7. Remove cardboard paint mask / template from the box and keep for future
potential use.
8. Turn on the home theater receiver and calibrate all loudspeakers in the system
according to the receiver manufacturer’s instructions.
IMPORTANT: DO NOT OVER TIGHTEN THE SCREWS! OVER TIGHTENING THEM MAY MAKE
THE GRILLE DIFFICULT TO INSTALL.