Numark Industries CDN 33 - Manual (Page 7)

CDN 33
- The Leader in DJ Technology
©2001 Numark Industries - 7 - http://www.numark.com
11. Play/Pause: Starts the music from the cue point or pauses it while in play. By pressing play after pause a new cue
point will be set
12. Jog Wheel:
Cue Function: As explained under “CUE”, when the music is paused and you rotate the wheel, music will sound. By
pressing play a new cue point is set.
Search Function: As explained under “SEARCH KNOB”, when search is press and you rotate the wheel, the music
will rapidly scan the music to find a cue point.
Pitch Bend Function: allows the user to temporarily change the speed of the music to align beats. When the beats
of the music of the CD you wish to match is fast compared to the tempo of the other music, rotate the jog wheel
counter clockwise (to the left). When the CD is behind, rotate the jog wheel clockwise (to the right). The pitch changes
temporarily while the jog wheel is rotated. The faster you rotate the wheel the more pitch is changed. Releasing the
wheel results in a return to the original pitch.
13. Pitch Range: actives the pitch slider and adjusts the amount of control the pitch slider has on the overall speed of
music. Tapping the pitch will toggle slider between 8% and 16% pitch ranges. Holding the pitch for 3 seconds will
deactivate the pitch control.
14. Pitch Range LEDs: indicate current pitch range. When both LEDs are off, the pitch slider is not active
15. Pitch Slider: By moving the slider in the (+) direction the speed of the music permanently speeds up. By moving the
slider in the (-) direction the speed of the music permanently slows down. To match the speeds of two CDs you can
adjust the pitch. When the tempo of the music of the CD you wish to match is slow compared to the tempo of the
other music, move the slider to the (+) side and match the speed. When faster, move the pitch slider to the (-) side.
By making this adjustment, the speeds will be matched, though the beats may not yet be aligned.
16. Pitch Bend Buttons: Allows the user to temporarily change the speed of the music to align beats. When the beats of
the music of the CD you wish to match is fast compared to the tempo of the other music press the (-). When the CD
is behind press the (+). The pitch changes temporarily while the (+) or (-) button is being pressed. The longer you
hold the buttons the more pitch is changed. Releasing the buttons results in a return to the original pitch.
17. BPM: Toggles the numeric display between pitch and BPM.
18. TAP: Tapping this button with the beat of the music indicates the current Beats Per Minute (BPM) in the display. The
unit will average your taps to determine the BPM so multiple taps is recommended.
19. Relay – Pressing this button will cause the sides of the unit to alternate play as one stops and the other starts. If the players are
set to single play mode then relay will alternate after each track. If the players are set to continuous it will relay after the entire CD
is played.
20. CD Drawer: Place your CDs you wish to play in here. This unit is designed to play commercially available CD and
properly burned and finalized CDR and CDRW formats. Due to variances on the specification of certain CD burners
and CDs some discs home made CDs may not play properly.
21. Power Switch: Turn on and turn off the machine with this button. The unit should always be shut down with this
button first before any external power is removed.