Nokia NP1250 - Manual (Page 11)

11
❿ Use the SELECT
▼ button to select
[CLIENT CERTIFICATE] and press the
ENTER button.
A list of files (thumbnail screen) will be dis-
played.
• For operating the thumbnail screen, see “5.
Using the Viewer” in the “User’s Manual”
(PDF).
• To return to the [AUTHENTICATION] page,
press the EXIT button.
NOTE:
Installing a digital certificate
You can install each digital certificate (client certificate and CA certificate) for [PROFILE 1 (or
)] on a file-by-file basis.
• Install a root CA certificate for a CA certificate.
• If you install a digital certificate over your existing digital certificate, the existing digital cer-
tificate will be overwritten with the new digital certificate.
• Once a digital certificate has been installed, its information cannot be deleted even if you
stop setting WPA-EAP or WPA-EAP.
⓫ On the thumbnail screen, select a
digital certificate (PKCS#12 format file)
saved in your USB memory device and
press the ENTER button.
The password screen will be displayed.
⓬ Select [PASSWORD] field and press the
ENTER button.
The character entry screen (software keyboard)
will be displayed. Set the password of the pri-
vate key. A password must be 1 character or
more and 3 characters or less.
The selected digital certificate file will be in-
stalled on the projector.
• When the root CA certificate is not included in
the file that was selected in Step ⓫, proceed
to Step ⓭. When the root certification author-
ity certificate is included, proceed to Step ⓯.
① Select a USB memory and
press the ENTER button. ② Highlight a digital certificate
and press the ENTER button.