Newcon Optik DN482 User Manual

Page 6

Advertising
background image

VIDEO

3. TECHNICAL CHARACTERISTICS

General

Magnification, x

3.7

6.1

Field of view, degree

10

8

Objective lens

Focus length, mm

100

165

F-number 1.5

2.0

Focus range

10 m to infinity

30 m to infinity

Eyepiece

Focus length, mm

27

Eye relief distance, mm

45

Dioptre setting

+3, -4

Mechanical characteristics

Overall dimensions, mm

280 x 89 x 79

Weight, kg

0.83

Working conditions

Temperature range

-40 oC to +50 oC

Relative humidity

0 to 98%

Electrical parameters

Power supply

2 batteries (AА type)

Voltage, V

3

Continuous work time, h, minimum

- Stand-by mode (no I/R)

60

- Active mode (with I/R)

5

Image intensifier tube

Type

Gen. II+/III, 18mm MCP

Photo cathode sensitivity,

µA/lm

230-800 / 1200-2200

Gain, maximum

20,000 – 30,000

Resolution, Lp/mm

51-64

Infrared illuminator

Type IR

diode

Power, mW

75

Illumination angle, degree

8-10

Illumination spectrum, nm

805

P.S.

Technical characteristics may be improved without prior notice.


6


• Make a control shot and find out whether the aiming point

coincides with the bullet hit point. (Make the correction again
if necessary);

• Set the protective caps into their places.
The device is ready for operation.

While performing the adjustment it should be considered that the
marking displacement mechanism of the device is equipped with a
click holder that displaces the marking both in vertical and
horizontal direction.



8. TAKING PHOTOS AND VIDEO SHOOTING


DN482/483 can be supplied with
an optional adapter for
photo/video devices for night
photo/video shooting.
Night photo shooting with
DN482/483 is easily performed by

35mm SLR cameras such as Nikon, Canon, Pentax etc. with standard
objective lens (50-58 mm focus).

Preparation of the device for photo shooting:

• Screw the adapter ring supplied in the set (diameter 52mm or

37mm) into the setting place of the light filter of the objective
lens in your camera. If the objective lens of your camera has
another setting diameter for a light filter (for example, 49mm
or 58mm) your have to purchase step up or step down adapter
rings from the 52 mm to your size. Such adapters are typically
sold at camera stores.








15


Advertising