NHT X2 - Manual (Page 6)

„ Satellite Subwoofer Systems
The X2 can be used to crossover a mono or stereo subwoofer to a stereo satellite system as long as
the desired crossover frequency falls into the 50 to 200Hz range. If using a mono subwoofer, three
channels of amplification will be needed. If using a stereo subwoofer system, four channels of ampli-
fication will be needed. See the following diagram for the proper system wiring when biamplifying with
an X2.
Line
Output
Line
Input
Line
Input
Line
Input
Line
Input
Speaker
Outputs Speaker
Outputs Speaker
Outputs Speaker
Outputs
+ + + +
+ + + +
- - - -
- - - -
Subwoofer
Output
(Optional)
(Optional)
Set to stereo for 2 subs
Set to mono for 1 sub
(Optional)
L
R
L Sat R Sub R Sat L Sub
X2
Amplifier Amplifier Amplifier Amplifier
AV Receiver or Surround Processor