Nuvo NV-T2DF - Manual (Page 23)

4.5 AUX Input
Page 23
4.5 AUX Input: The T2 has an additional input that allows an
external device to be controlled through the T2's IR pass
through. When this input is enabled, the level of the signal
input can be adjusted up or down to match the tuners' signal
output level.
5.0 Advanced Presets
The preset tab in the advanced settings has additional
features for specific preset setup.
5.1 High Cut: High-Cut is rarely used, but it can be a useful
function for a weaker AM signal that tends have high-
frequency hiss. This drop down menu allows you to select a
frequency cut-off for high-frequency reception. Any audio
above the chosen frequency will be filtered with a gentle roll-
off response.
5.1 High Cut
5.2 Level: This slider changes the signal level of the station.
This is especially useful for stations, such as many Public
Broadcasting System affiliates, that broadcast an
uncompressed signal with lower volume level than other
stations. This makes it possible for all stations to have the
same volume level as the user accesses presets.
5.1 Level
6.0 Categories
A unique feature of the T2 is the ability to set up categories of
listening. These are genre selections that automatically tune
through stations within that genre. Typical categories are
sports, talk, rock, classical. The T2 software has 38 preloaded
categories available. These are easily turned off if you do not
intend to use them, or new categories can be added to best fit
the user's needs.
6.1 Categories Tab: By highlighting categories within the
categories tab, you can then click on the On/Off button to turn
that category off. This prevents unused categories from being
displayed when scrolling through the category selections. If
you know you will not use a category, you can delete it all
together, or add a specific category that is not listed. Any of
the categories can be given a customized name by clicking on
the rename button.