NETGEAR Wireless Digital Media Player MP115 MP115NA User Manual
Start here
Advertising
Table of contents
Document Outline
- Start Here
- 1. Verify That Basic Requirements Are Met
- 2. Install the Media Server Software
- a. Power on your computer and log in as needed.
- b. Insert the Resource CD into the CD drive on the computer. The CD main page loads.
- c. Select Install Media Server software.
- d. Follow the InstallShield Wizard steps and click Finish when done.
- e. Restart your computer and the NETGEAR Media server software automatically runs.
- f. Use the Media server software to scan your hard drive to locate your video, picture, and music files.
- 3. Install the MP115 player
- a. Determine which type of cable your television uses:
- b. Connect the MP115 to your television with the correct cables.
- c. If you have a wired LAN network (not wireless), use an Ethernet cable such as the one provided in the package to connect the MP115 to your router.
- d. Install the two AA batteries that shipped with the product in the remote control.
- 4. Select the Network and Server for the MP115
- a. Make sure that the MP115 Media server software is running on your computer.
- b. Turn on the television.
- c. Connect the MP115 power cord and plug it into an outlet.
- d. If your network is wireless and/or uses security settings, the MP115 stops at Finding Network, and goes to the Settings, Available Networks screen.
- e. Use the remote control to enter your wireless and security settings.
- f. All the files that you scanned on the Media server are now available to play on the Wireless Digital Media Player MP115. Use the remote control to select the desired media.
- Troubleshooting Tips
- Technical Support