The router’s rear panel, What you need before you begin, The router’s rear panel -3 – NETGEAR ADSL Modem Router User Manual
Page 7: What you need before you begin -3
ADSL Modem Router Setup Manual
Connecting the Router to the Internet
1-3
v1.1, 2006-2
The Router’s Rear Panel
The rear panel of the ADSL modem router contains port connections.
Viewed from left to right, the rear panel contains the following elements:
1. RJ-11 ADSL port for connecting the router to an ADSL line
2. Four Local Ethernet RJ-45 LAN ports for connecting the router to the local computers
3. AC power adapter outlet
4. Factory Default Reset push button
What You Need Before You Begin
You need to prepare the following before you can set up your router:
•
Active Internet service provided by an ADSL account.
•
The Internet Service Provider (ISP) configuration information for your ADSL account.
•
ASDL microfilters as explained below.
•
Your computers set to DHCP.
Figure 1-2
1
2
4
3