NAD T 753 - Manual

•6 x 70W Simultaneous Minimum Continuous Power
into 4 / 8 ohms
•150W, 200W, 225W IHF Dynamic Power into 8, 4
and 2 ohms, respectively
•PowerDrive™
•Dolby Digital, Dolby Digital EX, ProLogic II, DTS,
DTS ES, DTS NEO:6, Matrix 7.1, EARS and Enhanced
Stereo
•5 A/V Custom Presets store unique speaker level and
tone control settings
•Direct access speaker level adjustment for surround,
center and subwoofer
• Stereo Bypass
•NAD Soft Clipping™
•6 A/V Inputs all S-Video and Composite,
2 Full Tape Loops
•  Component Video, 2 Inputs and 1 Output, HDTV
Compatible
•1 Audio Tape Input and Output
•6 Digital Inputs, 4 Coaxial, 2 TOS Link
freely assignable
•2 Digital Outputs, 1 Coaxial, 1 TOS Link
•7.1 Analogue Input (for DVD-Audio)
•Speaker A + B switching (Speakers B stereo only)
•Multi-Source 2nd zone audio pre-out with
independent source and volume
•ZR-2 Second Zone Remote included, discrete codes
for independent zone
•IEC Detachable Power Cable
•2 x IR Outputs, IR Input,
•2 x 12V Trigger Outputs, 12V Trigger Input
•Preamp Outputs for all 7.1 channels (2 Subwoofers)
•Amplifier Input for 6 Power Amps
•RDS FM/AM Tuner with 30 direct access presets
•HTR-2 - 8 Device Illuminated Learning Remote with
Macro function
The NAD T 753 is heir to many generations of award
winning NAD designs. This exceptional pedigree is
evident in both the look and the feel of the T 753, and it is
unmistakable the moment you listen. Based on the highly
successful T 752, the T 753 boasts detail improvements
in virtually every area of the receiver, for a cumulative
effect that is fully deserving of the new model number.
Starting with a revised heat management system that
reduces internal operating temperatures even under the
most severe operating conditions, the T 753 includes a
new volume control circuit and input switching circuit that
further reduces noise and distortion.
Performance
Today’s advanced surround sound receivers require
quality in both the digital decoding stages and the
analogue amplifying stages for the best overall
performance. The T 753 is an excellent example of the
NAD Design Team’s expertise in both areas.
Using the latest high speed DSP technology, NAD
was able to include the newest surround formats from
Dolby and DTS, as well as including NAD’s own highly
regarded music surround mode, the EARS (Enhanced
Ambient Recovery Circuit) circuit. Unlike, the typical
artificially enhanced DSP modes like “Club”, “Stadium”,
and “Church”, EARS uses DSP technology to extract the
natural ambience to create surround sound from any 2
channel source inducing a warm natural reverberant effect
without the artificial “BOING”. Surround processing is
automatically detected via the digital inputs of the T 753,
and the “highest” or most advanced form of decoding is
switched in. Conversion of the decoded digital bitstream
is performed with high resolution and extremely linear
D/A Converters carefully selected for their performance
capabilities.
NAD’s reputation for producing power amplifiers that are
both potent and musical is upheld in fine manner with the
T 753. Boasting a minimum of 70 watts continuous power
T 753 A/V Receiver