Numark Industries DM1685 - Manual (Page 14)

DM 1685
SPECIFICATIONS...
I N P U T S :
Line: 10k
Ω
input impedance
80 mV rms sensitivity (for 1.22 V output)
Mic: 10k
Ω
input impedance balanced/unbalanced
2.5 mV rms sensitivity (for 1.22 V output)
500 mV rms max input
Phono: 47k
Ω
input impedance
1.5 mV rms sensitivity @ 1 KHz (for 1.22 V output)
OUTPUTS:
Line: 9V rms max (+20 dBm)
Headphone Amp: .5 watt into 47
Ω
Distortion less than .01%
EQUALIZER:
6-Band Stereo Graphic EQ
Band centers 42 Hz, 152 Hz, 480Hz, 1.52KHz, 4.8KHz, 15.36KHz +/- 15 dB
SIGNAL TO NOISE RATIOS (vs. maximum output):
Line: Better than 85 dB
Mic: Better than 72 dB
Phono: Better than 83 dB
FREQUENCY RESPONSE:
Mic: 20 Hz- 15k Hz + _ .5 dB
Line: 20 Hz- 20k Hz + _ .5 dB
Phono: + _ 1 dB except for controlled attenuation of -3 dB
@ 20 Hz to reduce rumble and feedback
TALKOVER ATTENUATION:
variable from no cut to -16 dB
POWER CONSUMPTION:
20 Watt typical, 28 watt with full headphone output
SAMPLER:
FREQUENCY RESPONSE AND SAMPLING RATE:
Variable sampling rate 44.1 kHz with 16-bit sampling yields 20Hz-22 kHz.
MAXIMUM MEMORY TIME:
12 seconds
Note: Features and Specifications Subject to Change without Notice
Numark - The Proven Leader in DJ Technology
©1997 Numark Industries 14 http://www.numark.com