NordicTrack AudioRider NTEX3196.1 - Manual (Page 5)

5
Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the
packing materials until assembly is completed.
In addition to the included hex keys, assembly requires a phillips screwdriver and an
adjustable wrench .
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number
following the parentheses is the quantity used in assembly. Note: Some small parts may have been pre-
assembled for shipping. If a part is not in the parts bag, check to see if it has been preassembled.
M10 x 85mm Button
Screw (56)–4
M10 x 50mm Button
Screw (48)–3
M6 x 10mm
Screw (60)–2
M6 x 30mm Button
Screw (46)–4
M4 x 19mm
Screw (47)–2
M10 Split
Washer (55)–3
M4 x 16mm
Screw (54)–6
M4 x 12mm
Screw (64)–1
ASSEMBLY
1. Attach the Front Stabilizer (2) to the Frame (1) with
two M10 x 85mm Button Screws (56).
56
1
2
1