NeoDigits.com NEUNEO MPEG4 - Manual (Page 13)

Speaker Setup
START TO USE THIS PLAYER
AUDIO SETUP
Downmix
Front Speaker
Center Speaker
Rear Speaker
Sub Woofer
Test Tone
Dialog
Post DRC
If you only need 2 channels to enjoy music, it is
recommended to select “Stereo” option. When you use
this player’s built-in Dolby Digital decoder to play 5.1
channel sound, please select “off”.
To select speaker size. You can select “Large” or big size
speaker, “Small” for small size speaker. You can turn off
the Center/Rear speaker when you choose “off”
Optional settings: Large, Small, Off.
You can turn on/off the sub woofer speaker.
Optional settings: On, Off
To play test tone to test each speaker connect to the
player. Optional settings: On, Off
This function is to adjust the volume of dialog in the playing
material. ( Only available when you choose Downmix to
2 channels option. Optional settings: On, Off
This option is for compress audio signal with wide dynamic
range proportionally to reduce intense impact to speakers.
Optional settings: On, Off
You don’t need do anything in speaker setup when you
are using digital audio output ( optical / coaxial ). This is
for user who are using this player’s built-in 5.1 channel
output function.
SPDIF Setup
Spdif output
This option is from users who are using digital audio
output ( optical / coaxial ).
This is for choosing the digital audio format from
optical/coaxial output. If you are using an ampfilier with
built-in Dolby/DTS decoder, please choose “SPDIF/RAW”.
Optional settings: SPDIF OFF, SPDIF/RAW, SPDIF/PCM,
Manual.
-11-