Norton Abrasives Cut-Off Wheels For Metal Fabrication - Manual (Page 9)

GOOD
GEMINI, METAL, MASONRY
BETTER
CHARGER
Highest Productivity, Great Performance and Value
Chop Saw Reinforced Cut-off Wheels (10" – 16")
FEATURES BENEFITS
• Zirconia alumina/aluminum oxide abrasive blend • 2X the life and cut rate of aluminum oxide
• High performance resin bond • Free-cutting; burn-free cut
• Free Cut – side reinforced • Engineered for larger cross-sections and/or hard-to-cut materials
• Resist breakage and provide straight cuts
• Long Life – side reinforced • Ideal for small cross-section workpieces
• Resist breakage and provide straight cuts
• Rapid Cut – centrally reinforced, rough sides • Free cutting, non-binding; burr- and burn-free cuts
Charger Chop Saw Reinforced Cut-off Wheels BETTER
COMPETITIVE
A/O
NORTON
GEMINI
A/0
NORTON
CHARGER
ZA/AO
20%
100%
205%
Relative Wheel Life
Test done with 14 X 7/64 X 1
chopsaw
FEATURES BENEFITS
• Free Cut – side reinforced • Engineered for larger cross-sections and/or hard-to-cut materials
• Resist breakage and provide straight cuts
• Long Life – side reinforced • Ideal for small cross-section workpieces
• Resist breakage and provide straight cuts
• Rapid Cut – centrally reinforced, rough sides • Free cutting, non-binding; burr- and burn-free cuts
• Aluminum – specially formulated bond for aluminum and • Free cutting; resists loading
other soft, non-ferrous metals; no wax or rubber fillers • No surface contamination
Gemini Chop Saw Reinforced Cut-off Wheels GOOD
FEATURES BENEFITS
• Stud Cutter: thin, side-reinforced; aluminum oxide abrasive • Designed specifically for cutting steel studs
• Norton Masonry: sharp, silicon carbide grain • Engineered for all masonry materials such as concrete,
brick and asphalt
• Norton Metal: quality aluminum oxide abrasive • Designed for cutting alloys, steels and ferrous metals
Norton Metal, Masonry and Steel Stud Cutter Chop Saw Reinforced Wheels GOOD
SIZE: D X T X H MAX RPM STD PKG SPEC/PART NO. UPC NO. SPEC/PART NO. UPC NO.
TYPE 01 FLAT CUT-OFF – STEEL / STAINLESS / MASONRY
10 X 7/64 X 1 6,110 10 CO10764G 66253106109
12 X 7/64 X 1 5,095 10 CO12764CH 66253207552 CO12764G 66253207554
CO12764GRC 66253214561*
14 X 7/64 X 1 4,365 10 CO14764CHFC 66253306624 CO14764GFC 66253306627
10 CO14764CHLL 66253306625 CO14764GLL 66253306626
10 CO14764CHRC 66253309614* CO14764GRC 66253313588*
10 CO14764GALU 66253314816
10 CO14764MSS 07660789405
5 CO14764M 07660703970
5 CO14764MA 07660789402
16 X 7/64 X 1 3,820 10 CO16764FC 66253410196 CO16764G 66253410198
CO16764LL 66253410197
* RAPIDCUTS ARE CENTRALLY REINFORCED; ALL OTHERS ARE SIDE REINFORCED
new
look!
CHOP SAW
TECH tips
❚❚ Use Long Life chop saw wheels on small cross section workpieces.
❚❚ Use Free Cut chop saw wheels on larger cross-sections and/or hard-to-cut materials.
It is the user’s responsibility to refer to and
comply with ANSI B7.1
9