Switch the device on, Befor e use – Nokia 702 User Manual
Page 15
Befor
e use
15
•
Press the
Voice key (
16
)
during a call to
change between
the handset and
loudspeaker.
Press and hold
in the
standby mode to
activate voice
commands.
• Open the camera
lens cover (
17
)
to activate the
back camera.
This also
deactivates the
keypad lock, if it
is on. Closing the
camera lens cover returns the device to the previous
mode. The keypad lock is reactivated, if it was on.
• Charger connector (
18
)
• Pop-Port™ connector (
19
) for enhancements such as a
USB data cable and headset.
• LED flash (
20
)
• Back camera (
21
) for high resolution image capture or
video recording.
Switch the device on
Press and hold the
power key (
).
If the phone asks for a
PIN code, UPIN code,
or lock code, enter the
code (displayed as
****), and press
(
OK
). The PIN code or
UPIN code is usually supplied with the SIM or USIM card.
The factory setting for the lock code is 12345. For more
information on the access codes, see the user guide,
'Tools—Settings—Security'.