National Instruments Portable Monitor Accessory NI PMA-1115 - Manual (Page 6)

NI PMA-1115 User Guide and Specifications 6 ni.com
8. If desired, use the provided interlocking fastener to attach the
AC adapter to the unit. One suggested location is shown in Figure 7.
Cable ties are also provided to organize the power cabling.
Figure 7. Suggested Location for Attaching AC Adapter
Note Do not place the AC adapter over any vent holes on the chassis cover, as this may
cause chassis cooling issues.
System Configuration
The On-Screen Display (OSD) controls on the side of the PMA-1115
provide standby functionality, as well as standard video adjustments for the
LCD. The touch screen can be configured and calibrated through the
TouchKit software found on the provided driver CD.
Note The video resolution of the PXI Controller must be set to 1024 × 768 or lower.