NEC 1080Xd - Manual (Page 52)

3-2 Service Processor
SP Console
The service processor (SP) in the Express5800/1080Xd main chassis provides the
interface for system management and RAS functions. The SP is on the service
processor and clock (ISP-C) board.
The following sections describe:
! SP console connections
! Console operations
! Console status and login authentication
! Login and Main Menu.
SP Console Connections
The service processor supports two types of console connections (see Figure 3-1):
! serial (local console)
! LAN via TCP port 5001 (LAN console).
Both serial and LAN console connections provide the same operation. However, the
LAN console requires an initial configuration which can only be done using the local
console. See Table 3-1 for console configuration settings.
ISP-C Board
Local
Console
Serial Connector 0
Null Modem Cable
LAN Connector
LAN
Console
TCP5001
Figure 3-1. Express5800/1080Xd Console Connection