Troubleshooting, Basic menu – Nikon VT650 User Manual

Page 2

Advertising
background image

Basic Menu

Source Select

Picture

Volume

Image Options

Projector Options

Information

Troubleshooting

Standby

Cooling down

Lamp in Nomal mode

Lamp in Eco mode

One minute after lamp is turned on

Retrying to turn on lamp

Lamp has reached its end of life
(2000 hours or over : Normal mode)
(3000 hours or over : Eco mode)

Lamp life has reached its end of life
(2100 hours or over : Normal mode)
(3100 hours or over : Eco mode)

Lamp or filter cover error
(3 locations)

Temperature error

Fan error

Lamp error

Power/ Status Light Messages

Condition

Steady orange

Blinking green

Steady green

Steady green

Blinking green

Steady green

Steady green

Steady orange

Steady orange

Steady orange

Steady orange

Steady orange

Steady green

Depending Lamp mode

Blinking orange

Steady red

Steady red

Blinking red
(1 sec interval)

Blinking red
(4 sec interval)

Blinking red
(8 sec interval)

Blinking red
(12 sec interval)

Blinks green for 60 seconds.

Do not turn off the projector during
this condition.

The projector retries 3 times at an
interval of 15 sec for max. 45 sec).

Message appears on screen during
this condition. The projector reaches
its end of life. Please replace the
lamp as soon as possible.

The projector is in standby mode and
cannot be turned on.

The projector is in standby mode and
cannot be turned on.

The projector is in standby mode and
cannot be turned on.

The projector is in standby mode and
cannot be turned on.

The projector is in standby mode and
cannot be turned on.

Power Indicator

Status Indicator

Note

Common Problems & Solutions

Does not turn on

No picture

Image isn’t square to the screen

Picture is blurred

Image is scrolling vertically,
horizontally or both

Remote control does not work

Status indicator is lit or blinking

Cross color in RGB mode

• Check that the power cable is plugged in and that the power button on the

projector cabinet or the remote control is on.

• Ensure that the lamp cover is installed correctly. See page E-38.
• Check to see if the projector has overheated or the lamp usage exceeds 2100

hours (3100 hours in Eco mode). If there is insufficient ventilation around the
projector or if the room where you’re presenting is particularly warm, move the
projector to a cooler location.

• Use the menu to select your source (Video, S-Video or RGB). See page E-31.
• Ensure your cables are connected properly.
• Use menus to adjust the brightness and contrast. See page E-31.
• Remove the lens cap.
• Reset the settings or adjustments to factory preset levels using the Factory

Default on the Image Options Menu. See page E-33.

• Reposition the projector to improve its angle to the screen. See page E-28.
• Use the Keystone on the Image Options Menu to correct the trapezoid distortion.

See page E-31.

• Adjust the focus. See page E-27.
• Reposition the projector to improve its angle to the screen. See page E-28.
• Ensure that the distance between the projector and screen is within the

adjustment range of the lens. See page E-17.

• Use menus or Source button on the remote control or the cabinet to select the

source you want to input.

• Install new batteries. See page E-13.
• Make sure there are no obstacles between you and the projector.
• Stand within 22 feet (7 m) of the projector. See page E-13.
• Make sure that you are in the Projector mode or the PJ button lights in red. If not,

press the PJ button.

• See the Power/ Status Light messages.

• If Auto Adjust is off, turn it on. If Auto Adjust is on, turn it off and balance the image

with the Position and Clock Adjust on the Advanced Options Menu. See page
E-33.

Problem

Check These Items

Basic Menu

Normal/Eco

RGB

Video

S-Video

Menu

Setup

* This setting is optional. you need the optional presentation

remote control (PR51KIT).

Source Select

Picture

Projector Options

Brghtness
Contrast
Color
Hue
Sharpness

Image Options

Menu

Menu Mode
Language
Source Display
No Input Display
Volume Bar
Keystone Bar *
Filter Clean Message
Menu Display Time

Setup

Orientation
Cinema Position
Background

Page 1 (Source Index/Input Terminal/Horizontal Frequency/Vertical Frequency/Sync

Polarity)

Page 2 (Signal Type/Video Type/Sync Type/Interlace)
Page 3 (Remaining Lamp Time/Lamp Hour Meter/Projector Usage)

Keystone

Lamp Mode

Factory Default

Desktop Front/Ceiling Rear/
Desktop Rear/Ceiling Front

Top/Center/Bottom

Blue/Black/Logo

Basic/Advanced

English/German/French/
Italian/Spanish/Swedish/
Japanese

On/Off

On/Off

On/Off

On/Off

On/Off

Manual/Auto 5 sec/Auto 15
sec/Auto 45 sec

Volume

All Data/Current Signal

Information

Advertising