NEC 4650N - Manual (Page 20)

14 SuperScript 4650 Series — User’s Guide
I DENTIFYING P RINTER P ARTS
Use the illustrations on the facing page to identify standard
parts for the SuperScript 4650 Series printer.
Front View
• Operator Panel—for displaying messages and
configuring the printer
• Power Button—for turning on and off the printer
• Top Cover—provides access to the Fuser Unit and inside
of the printer (also serves as the Output Tray)
• Output Tray —holds up to 250 printed sheets
• Top Cover Release button—unlocks and opens the Top
Cover
• Front Cover—provides access to Toner Modules and
Toner Collector
• Front Cover Latch—unlocks and opens the Front Cover
• Paper Tray 1—standard input tray, holds 250 sheets of
paper
Front Internal View
• Toner Module Racks—holds Toner Modules
• Toner Collector—collects used toner
• Paper Transfer Rollers—moves the paper from the inside
of the printer to the Output Tray
Back View
• Serial Number—necessary for warranty registration
• Back Cover—provides access to clear paper jams
• Back Cover Latch—lift to open back of printer
• Filter Cover—contains the Ozone Filter
• Bidirectional parallel interface—for attaching
bidirectional parallel cable from your computer
• Ethernet interface—for attaching the Ethernet 10/100
Base-TX connectors from your network
• SCSI Interface (Port)—for attaching a selected scanner
and/or Zip drive
• Interface Panel—contains the interface for the controller
board, hard drive and network interface card
• Power Cord Connector—for attaching the power cord
• Back Vent—allows ventilation
Back Internal View
• Transfer Drum—transfers image to paper
• Registration Rollers—keeps the paper straight
• Transfer Roller—works with the Transfer Drum to
transfer the image to the paper
• Paper Discharger—removes the static electricity from the
paper
• Transfer Unit—consists of the above four parts
Top Internal View
• Fuser Unit—uses heat and pressure to adhere the toner
image to the paper. Contains two Fuser Rollers.
• Fuser Oil Bottle—holds the oil that helps adhere the
toner image to the paper
• Fuser Cleaning Roller—helps keep the Fuser Rollers
clean
• Belt Cartridge—also known as the Photoconductor Belt
Module or OPC Unit.