NuTone 690NT - Manual (Page 4)

model 690NT
Page 
key No. part No. description
1 97016777 Grille Assembly (includes key no. 2)
2 99140198 Grille Spring (2 required)
3 98010267 motor Plate (“D-Housing” fans)
4 98010268 motor Plate (“690” Series fans)
5 99260423 Nut, Hex Flange #8-32 (2 required)
6 99150625 Screw #8-18 X .375
97016924 Parts Bag (includes key nos. 5 & 6)
7 97016941 motor/Bracket Assembly
8 97016962 Wheel
97016923 Wheel/motor Assembly
(includes key nos. 7 & 8)
9 99111346 Scroll Band
Order replacement parts by “Part No.”, not by “Key No.”
service parTs
1
2
3 4
5 5
6
7
8
9
99043583C
NEW GRILLE
GRILLE
SPRING
2 TABS
&
SLOTS
SCREW
-- 690 series faN oNly --
8. install new blower assembly into existing fan
housing.
Insert two motor plate tabs into slots in housing and pivot
blower assembly up until it is touching the wiring box. Se-
cure in place with screw provided. Plug in motor.
mOTOR
PLATE
Squeeze one grille spring together and insert it into the
matching slot in motor plate. Repeat with the other grille
spring.
Push grille until it is tight against ceiling or wall.
9. install new grille.