Nokia 6108 - Manual (Page 44)

42
Appendix:A
When using the camcorder:
Problem Cause Solution
The camcorder can
not be powered on
normally.
The battery is out of
power.
Replace or recharge the
battery.
The battery are
incorrectly installed.
Re-install the battery.
The camcorder is
still powered on,
but the LCD screen
does not display.
It may happen that
you move the Joystick
toward left several times
and thus turn off the
display.
Move the Joystick toward left
again to regain display.
Can not take
pictures or video
clips when pressing
the Shutter or
Record button.
Out of memory.
Free some space from the
SD/MMC card or the internal
memory.
The camcorder is
recharging the flash
strobe.
Wait until the flash strobe is
fully charged.
Using a “protected” SD
card.
Set the SD card to be
writable.
The LCD screen
displays “MEMORY
ERROR” or “CARD
ERROR” message.
Or the camcorder
cannot read the
memory card.
The format of the
memory card is not
compatible with the
camcorder.
Use the camcorder “Format”
function to format the card.
The memory card is
corrupted.
Replace the memory card
with a new one.
Troubleshooting