Nortel Networks 70 Series - Manual (Page 38)

Installation and Reference for the BayStack 70 Series 10/100 Ethernet Switches
3-2 206375-A
• Optional, country-specific power cord, which can be purchased with your
switch
• Warranty card
• Safety Information card
Operating Environment
Before you begin installing your switch, prepare the installation site. Make sure
the operating environment, as listed in Appendix A, “Technical Specifications,”
meets the physical requirements of the switch.
Install your BayStack 70 Series 10/100 Ethernet Switch in a ventilated area that is
dust free and away from heat vents, warm air exhaust from other equipment, and
direct sunlight. Avoid proximity to large electric motors or other electromagnetic
equipment.
Power Specifications
The BayStack 70-8T 10/100 Ethernet Switch and BayStack 70-16T 10/100
Ethernet Switch feature an external 5 V DC power adapter. The BayStack 70-24T
10/100 Ethernet Switch has an internal (100 to 240 V AC, 50 to 60 Hz) universal
power supply. You can purchase a country-specific power cord for any BayStack
70 Series 10/100 Ethernet Switch.
Before connecting the switch to power with any power cord, make sure the power
cord has a plug on the other end that is appropriate for the country where you are
using the switch.
Danger: Use only power cords with a grounding path. Without a proper
ground, a person touching the unit is in danger of receiving an electrical shock.
Lack of a grounding path to the unit may result in excessive conducted or
radiated emissions.