NEC LCD1510V - Manual (Page 33)

To access OSM press any of the control buttons ( , , , ) or the PROCEED or
EXIT button.
To rotate OSM between Landscape and Portrait modes, press the RESET button.
Main Menu Sub-Menu
EXIT Exits the OSM controls. Exits to the OSM main
menu.
CONTROL / Moves the highlighted Moves the highlighted
area up/down to select area up/down to select
one of the controls one of the controls
CONTROL / Moves the highlighted area Moves the bar left /
left / rights to select right to increase or
control menus. decrease the adjustment.
PROCEED Has no function. Activates Auto Adjust
and ALL
RESET functions.
RESET Resets the highlighted Resets the highlighted
contol menu to the factory contol to the factory
setting. setting.
NOTE: When RESET is pressed in the main and sub-menu, a warning window will
appear allowing you to cancel the RESET function by pressing the EXIT button.
Controls
OSM Controls
The OSM controls on the front of the monitor provide the following
functions:
E - 18 Controls
OSM
78133551/Fix.PM5 98.3.17, 8:20 AM 32