NordicTrack NTC4015.2 - Manual (Page 6)

6
7. Hold the Right Handlebar (5) near the Upright (2), and
connect the Pulse Extension Wire (51) to the Pulse
Wire (75).
Attach the Right Handlebar (5) to the Upright (2) with
two M6 x 36mm Button Bolts (76) and two M6 Nylon
Locknuts (72). Be careful to avoid damaging the
Pulse Wires (51, 75).
Attach the Left Handlebar (3) to the Upright (2) in the
same way.
3
5
2
7
72
51 75
76
Be careful to
avoid pinching
the Pulse
Wires.
8. Attach the Backrest (8) to the Seat Bracket (11) with
four M8 x 41mm Button Bolts (78) and four M8 Nylon
Locknuts (10). Start all four Button Bolts and Nylon
Locknuts before you tighten any of them.
8
6. While another person holds the Console (4) near the
Upright (2), connect the Upper Wire Harness (42) to
the wire harness on the Console, and connect the
Pulse Extension Wire (51) to the pulse wire on the
Console. Insert the excess wiring into the Upright.
Attach the Console (4) to the Upright (2) with four M4 x
16mm Round Head Screws (80). Be careful to avoid
pinching the wires and wire harnesses.
2
6
51
4
80
42
80
Be careful
to avoid
pinching
the Wire
Harnesses.
11
10
8
10
78