Niles Audio HD5 - Manual (Page 22)

21
Spe
cifi
cat
ion
s
Specifications
Model HD5
Driver Compliment
5-1/4” Injection-Molded TCC Woofer with
Custom Debris Screen, Butyl Rubber
Surround, High BL Magnet Structure with
Vented Pole Piece
1” Teteron Tweeter Housed in a Low
Diffraction Precision Adjustment
Mechanism
Design Principle
Infinite baffle for large and varying air
volumes
Recommended Amplifier Power
Ten to One Hundred Watts per Channel
Nominal Impedance
6 Ohms
Frequency Response
60 Hz to 21,000 Hz, plus or minus 3dB
(on axis)
Dispersion Pattern
90 degrees Horizontally or Vertically
(plus or minus 5dB)
Sensitivity
88 decibels for 2.83 volts of Pink Noise,
measured at 1 meter on axis
Overall Exterior Frame Dimensions
7-1/8” x 9-7/8” (18.1 cm x 25.1 cm)
Depth Behind Wall
3-1/8” Deep (assumes 1/2” drywall)
(7.9 cm)
Wall Cut-Out Dimensions
6-1/4” x 9” (15.9 cm x 22.9 cm)
Wiring Requirements
We recommend 16 to 18 gauge stranded
wire for up to 80 feet, 14 gauge stranded
wire for up to two hundred feet.
Connectors accommodate 12 to 18 gauge
stranded wire.
Model HD6
Driver Compliment
6-1/2” Injection-Molded TCC Woofer with
Custom Debris Screen, Butyl Rubber
Surround, High BL Magnet Structure with
Vented Pole Piece
1” Teteron Tweeter Housed in a Low
Diffraction Precision Adjustment
Mechanism
Design Principle
Infinite baffle for large and varying air
volumes
Recommended Amplifier Power
Ten to One Hundred Twenty Five Watts
per Channel
Nominal Impedance
6 Ohms
Frequency Response
50 Hz to 21,000 Hz, plus or minus 3dB
(on axis)
Dispersion Pattern
90 degrees Horizontally or Vertically
(plus or minus 5dB)
Sensitivity
89 decibels for 2.83 volts of Pink Noise,
measured at 1 meter on axis
Overall Exterior Frame Dimensions
8-3/4” x 11-11/16” (22.2 cm x 29.7 cm)
Depth Behind Wall
3-1/8” Deep (assumes 1/2” drywall)
(7.9 cm)
Wall Cut-Out Dimensions
7-5/8” x 10-5/8” (19.4 cm x 27 cm)
Wiring Requirements
We recommend 16 to 18 gauge stranded
wire for up to 80 feet, 14 gauge stranded
wire for up to two hundred feet.
Connectors accommodate 12 to 18 gauge
stranded wire.