Nady Systems PRM-400 - Manual (Page 4)

F E AT U R E S
4
The PRM-400 is compact desk console or rackmountable 200W/channel stereo powered mixer with 16 built-in selec-
table preset DSP echo and reverb effects and a comprehensive mixer section with extensive routing capability. The
PRM-400 is a versatile audio tool that combines exceptional flexibility and performance, and is ideal for many small
venue/live sound reinforcement applications.
• Superior audio performance with low noise and powerful,
full-spectrum transparent audio and natural sounding selec-
table echo/reverb effects
• 6 mono balanced XLR mic and balanced 1/4” line inputs,
trim controls and switchable 20dB pads, 3-band EQ’s, Peak
overload LEDs, Aux, Effects and Pan controls
• Aux/Monitor switch allows the PRM-400 to be used as
either a stereo main (FOH) or a mono main and monitors
powered mixer
• Stereo power amplifier delivers 200W/side @ 4 Ohms. Fan-
cooled, bipolar amplifier design for longest life and maxi-
mum reliability.
• Dual 7-band master graphic EQ (with bypass switch) can
be used in stereo or mono for main and monitor EQ
• Aux Send and Aux Return with Aux Send and Aux Return
controls
• Six 1/4” TRS inserts allow independent connection of
effects devices for each mono channel
• Stereo Master inserts with Pre EQ and Post EQ 1/4” TRS
jacks
• 60 mm faders on all channels and master L/R and Effect
bus mix for precise level control
• High quality sealed pots with center detents (EQ, EFF,
PAN)
• Tape In and Record Out RCA jacks with Tape level control
• Built-in DSP (Digital Sound Processor) for ECHO
(REVERB) with 16 selectable preset level and echo inter-
vals and separate Repeat control, Effects Return and both
individual channel and master mix Effects Send controls,
master Effects fader, separate effects PFL monitoring, and
numeric LED display
• Headphone output with separate volume adjust
• PFL control for each channel allows headphone monitoring
independent of channel volume
• Switchable global 48V phantom power
• Dual 10-segment LED meter for L/R main and PFL
• Erasable area above all faders for notations
• Internal AC supply with 115/230V select switch
• Road-tough all steel construction. Rack ears supplied.
• Dimensions & Weight: 16” x 17” x 6” (406 x 432 x 152
mm), 27.8 lbs (12.6 Kg)