Nokia SU-27W - Manual (Page 10)

G e t t i n g s t a r t e d
10
In some mobile devices you may need to make the Bluetooth
connection separately after pairing. You only need to pair the digital
pen with your mobile device once.
If the pairing is successful, the pen vibrates three times, and the page
indicator turns green and is shown for 2 seconds. The pen is now ready
for use.
If the pairing or connection fails, the page indicator briefly flashes red
twice and is shown for 2 seconds. Check that the pen and the mobile
device are switched on, and carefully enter the correct Bluetooth
passcode.
You can set the pen to connect with your mobile device automatically
when the pen is switched on. To do this in Nokia devices, change your
paired device settings in the Bluetooth menu.
The Bluetooth connection between the digital pen and the compatible
mobile device is active only when the pen sends notes to the mobile
device.
Pair from the pen
1. Activate the Bluetooth feature on your mobile device as instructed in
its user guide.
2. Use the pen to tap the Pairing box box that can be found at the end
of the notepad.
The page indicator flashes blue to show that the pen can be paired
with a compatible device within 2 minutes.
3. Select the digital pen from the list of found devices on your mobile
device, and enter the Bluetooth passcode.
■ Change the ink cartridge
When the ink cartridge of the pen runs out, replace it with a new
cartridge. You can buy ink cartridges refills at local office supply
retailers. Use only ink refills that are ISO 12757-1 D1 compliant and use
blue ink.