First steps, Inserting the batteries, Applicable batteries – Nortel Networks L110 User Manual

Page 26: Turning on and off the camera, Applicable batteries turning on and off the camera

Advertising
background image

14

First Ste

p

s

First Steps

Inserting the Batteries

1

Open the battery-chamber/memory card slot
cover.

Before opening the battery-chamber/memory card slot

cover, hold the camera upside down to prevent the
batteries from falling out.

2

Insert the Batteries

Confirm that the positive (+) and negative (-) terminals are

oriented correctly as described on the label at the entrance
of the battery chamber, and insert the batteries.

3

Close the battery-chamber/memory card slot
cover.

Applicable Batteries

Four FR6/L91 (AA-size) lithium batteries (batteries supplied)
Four LR6/L40 (AA-size) alkaline batteries
Four EN-MH2 rechargeable Ni-MH (nickel metal hydride) batteries

Turning On and Off the Camera

After removing the lens cap, press the power switch to
turn on the camera. The power-on lamp (green) lights for
a moment, then the monitor turns on. Press the power
switch again to turn the camera off. When the camera
turns off, both the power-on lamp and monitor turn off.

If the camera is turned off, hold down

c to turn the

camera on in playback mode (

A 26).

1

2

3

2

1

Advertising