Nikon collpix L16 - Manual (Page 67)

55
Connecting to a Printer
Conne
cti
ng to
Te
levi
sions, Comp
ute
rs and Printe
rs
Connecting the Camera and Printer
1
Turn off the camera.
2
Turn on the printer.
Check printer settings.
3
Connect the camera to the printer using the supplied USB cable.
4
Turn on the camera.
When connected correctly, the PictBridge startup screen
1 will be displayed in the camera monitor. Then the
print selection screen will be displayed 2.
B
Connecting the USB Cable
• When connecting the USB cable, be sure that the connectors are oriented correctly. Do not use
force when connecting the USB cable. When disconnecting the USB cable, do not pull the
connector at an angle.
• Do not pinch the connector cover between the camera’s USB connector and the USB cable
connector when connecting the cable to the camera.
15/05
2008
NO.
[ 12 ]
12
Print selection
1 2