Eizo FlexScan Color LCD Monitor SX2262W - Manual (Page 26)

6 Chapter 3 Setting Monitor
-. Setting the EIZO Logo Display [Logo]
The EIZO logo appears on the display when turning on the monitor. This function allows you to display,
or not, the EIZO logo.
Procedure
Press to turn off the monitor.
Press holding down at least 2 seconds to turn on the monitor.
The Optional Settings menu appears.
Choose <Logo> from the <Optional Settings> menu, and press .
Select “On” or “Off” with or , and press .
Select “Finish” with or .
Press to exit the Optional Settings.
The Optional Settings menu is closed.
-. Setting Orientation [Orientation]
●
To set the orientation of the Adjustment menu
This function allows you to change the orientation of the Adjustment menu when using the monitor
screen in vertical display position. (Default settings : Landscape)
Procedure
Choose <Menu Settings> from the Adjustment menu, and press
.
Choose <Orientation> from the <Menu Settings> menu, and press
.
Select “Landscape” or “Portrait” with or .
Press to exit the adjustment.
When selecting “Portrait”, turn the monitor screen 90° in clockwise direction.
Attention
Be sure that the cables are correctly connected.
•
NOTE
For using the monitor with “Portrait” position, the graphics board supporting portrait display is required. When
placing the monitor in a "Portrait" position, settings of your graphics board need to be changed. Refer to the
manual of the graphics board for details. •
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.