NEC NP2250 - Manual (Page 142)

8
6. Using On-Screen Menu
Setting MONITOR OUT Connector [OUT TERMINAL]
This option allows you to determine which RGB or component source is output from the MONITOR OUT connector
during Standby mode.
LAST....................... The.signal.from.the.last.COMPUTER.1,.COMPUTER.2.or.COMPONENT.input.will.be.output.to.the.MONI-
TOR.OUT.connector.
COMPUTER.1,.2..... The.signal.from.the.COMPUTER.1.or.COMPUTER.2.input.will.be.output.to.the.MONITOR.OUT.connector.
COMPONENT.......... The.signal.from.the.COMPONENT.input.will.be.output.to.the.MONITOR.OUT.connectors.
NOTE: When [COMPUTER 1] or [COMPUTER 2] is selected for [AUTO POWER ON(COMP1/2)], the [OUT TERMINAL] feature is
not available.