Nostalgia Electrics PBO-220 - Manual (Page 4)

3
PARTS & ASSEMBLY (Continued)
3.
Detach the Door Handle brackets from the Glass Door.
4. Reattach one bracket to the outside of Glass Door.
5. Insert the Door Handle into the installed bracket making sure the Door Handle lines up
with the notch in the bracket.
6. Install other bracket. Notch should line up if step 5 was done correctly.















Assembly Instructions for Grease Tray:
1. Before using the appliance, take out the Grease Tray and turn it so that the metal
edge points downward. (see image below)
2. Slide Grease Tray all the way into the slot at the bottom of oven until Grease Tray
locks securely in place.
CAUTION: Never touch hot metal with fingers. Always use an oven mitt or potholder
when operating the PIZZA OVEN™. Please clean Grease Tray between each use.