Nokia MW1122 - Manual (Page 107)

MW1122 Administrator Manual
E Copyright Nokia Networks Oy C33902001SE_00 5-72
Command Disable/enable management through the wireless
LAN interface
Description Enables/disables the management of MW1122 through
the wireless LAN interface.
Syntax [no] ip admin-disabled
Arguments no enables management through the wireless LAN in-
terface.
Example
MW1122(conf-wlan)#ip admin-disabled
MW1122(conf-wlan)#
VCC (ATM channel) commands
Command Activate ATM channel
Description Activates an ATM channel and sets the encapsulation
for that channel.
Syntax [no] pvc <vpi> <vci> <encap>
Arguments no deactivates the ATM channel.
vpi is the Virtual Path Identifier of the ATM channel.
Possible values are 0...255.
vci is the Virtual Channel Identifier of the ATM chan-
nel. Possible values are 0...65535.
encap is the encapsulation of the ATM channel. The
encapsulations are auto-llc , eth-llc , ip-llc ,
ppp-vc , and tunneled-ppp-vc . auto-llc en-
capsulates the routed packets in ip-llc and the bridged
packets in eth-llc.
Example
MW1122(conf-vccx)#pvc 0 100 ip-llc
MW1122(conf-vccx)#
Command Switch on/off bridging
Description Switches bridging on/off on the specified ATM channel.
Syntax [no] bridging
Arguments no switches off bridging.
Example
MW1122(conf-vccx)#bridging
MW1122(conf-vccx)#