Navigon SmartMirror - Manual (Page 17)

Basic Operations
Starting the SmartMirror
Initializing the GPS receiver
As soon as the navigation device has been switched on, initialization of the GPS
receiver begins.
In the upper right-hand corner of the display, the GPS symbol appears. As soon as
data from at least 3 satellites is received, the symbol changes to GPS Ready .
Setting the volume
The volume of the spoken driving instructions can be adjusted during navigation.
With a map displayed:
1. Tap ( Volume )
.
The volume bar opens. It contains three buttons for adjusting the volume:
( Louder
)
, ( Quieter
)
, ( Volume on/off
)
.
2. Tap ( Volume
)
again.
The volume bar closes.
Stopping the SmartMirror
• Press and hold the (On/Off) switch for at least 2 seconds.
Note: It can take up to 20 minutes to initialize the integrated GPS receiver for the first
time.
Each time you turn on the device, GPS reception starts within one minute.
If the navigation device has been switched off for more than a week, the next initializa-
tion can take up to 10 minutes.
Note: If the GPS symbol displays GPS Ready after considerably less than 20 minutes,
it is advisable to leave the receiver switched on for at least an additional 15 minutes to
ensure reliable operation.
2009 ESCORT SmartMirror User’s Guide 11
Revision 1.0 ESCORT INC / NAVIGON INC