NordicTrack NTHK99900 - Manual (Page 15)

15
HOW TO CONNECT YOUR HOME STEREO
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of the audio cable into the jack on the
side of the hiker near the power cord. Plug the other
end of the cable into the included adapter. Plug the
adapter into the LINE OUT jack on your stereo.
B. Plug one end of the audio cable into the jack on the
side of the hiker near the power cord. Plug the other
end of the cable into the included adapter. Plug the
adapter into an RCA Y-adapter (available at elec-
tronics stores). Next, remove the wire that is cur-
rently plugged into the LINE OUT jack on your
stereo and plug the wire into the unused side of the
RCA Y-adapter. Plug the RCA Y-adapter into the
LINE OUT jack on your stereo.
HOW TO CONNECT YOUR COMPUTER
Note: If your computer has a 3.5mm LINE OUT jack,
see instruction A. If your computer has only a
PHONES jack, see instruction B.
A. Plug one end of the audio cable into the jack on the
side of the hiker near the power cord. Plug the other
end of the cable into the LINE OUT jack on your
computer.
B. Plug one end of the audio cable into the jack on the
side of the hiker near the power cord. Plug the other
end of the cable into a 3.5mm Y-adapter (available
at electronics stores). Plug the Y-adapter into the
PHONES jack on your computer. Plug your head-
phones or speakers into the other side of the Y-
adapter.
CD
VCR
Amp
LINE OUT
LINE OUT
Audio
Cable
Adapter
A
LINE OUT
Audio
Cable
A
CD
VCR
Amp
LINE OUT
Audio
Cable
RCA
Y-adapter
Wire removed from
LINE OUT jack
B
Adapter
PHONES
Audio
Cable
B
3.5mm
Y-adapter
Headphones/Speakers