Connecting the headset and using the controls, Installation – NEC DS1000/2000 User Manual
Page 22
Installation
Using the Headband Style Headset with your Cordless Telephone
18
◆ Chapter 1: Installation
DS1000/2000 Cordless Telephone User Guide
Connecting the Headset and using the Controls
To connect the headset and use the controls (Figure 22: Connecting the Headset and
Using the Controls):
●
Plug the headset into the
Headset Jack
on the top of the handset.
●
Use the
Microphone Volume
control to adjust the volume of your headset’s microphone
(i.e., your voice).
●
Use the
Headset Receiver Volume
control to adjust the volume of the receiver in your head-
set (i.e., your caller’s voice).
●
To temporarily turn off your headset microphone, slide the
Microphone Mute
switch into the
Microphone Muted position.
●
Clip the
Belt/Lapel Clip
to your belt or lapel to secure the headset cord.
Figure 22: Connecting the Headset and Using the Controls
80683 - 16
Belt/lapel clip
Minimum
volume
Maximum
volume
Headset receive vloume
Microphone mute
Microphone
muted
Microphone
ON
Microphone volume
More
volume
Less
volume