Major features, Using the lens, Mounting the lens on the camera – Nikon AF-S DX NIKKOR User Manual

Page 12: Removing the lens from the camera, Mounting index (p. 12)

Advertising
background image

En

12

Thank you for purchasing the AF-S DX NIKKOR 35mm f/1.8G lens. DX Nikkor lenses are specially designed for use

with Nikon digital-SLR (Nikon DX-format) cameras, such as the D300 and D90. When mounted on Nikon DX-format

cameras, the lens picture angle is equivalent to approximately 1.5× the focal length in 35mm format. Before using

this lens, please read these instructions and refer to your camera’s User’s Manual.

Major features

• This lens employs a Silent Wave Motor to drive the

focusing mechanism, making autofocusing smooth,

silent and almost instantaneous. The focus mode

switch 9 is provided for simple selection of

autofocus (A) or manual focus (M) operation.

• More accurate exposure control is possible when this

is mounted on a Nikon camera with 3D color matrix

metering capability, because subject distance

information is transferred from the lens to the camera.

• Superior optical performance and rendering

characteristics are maximized with the use of one

aspherical lens element. In addition, soft and pleasing

blur characteristics in portions of pictures that are

out-of focus are achieved by the rounded diaphragm.

• Up to two Wireless Remote Speedlight SB-R200s can

be mounted on the edge of the lens.

Using the lens

Mounting the lens on the camera

Turn the camera off.
Remove the rear lens cap. (Fig. D)
Align the mounting index 6 on the lens with the
mounting index on the camera, and rotate the lens
counterclockwise until it clicks into place. Be sure
that the lens is in the correct position when the
mounting index 6 is on the top of the lens.
Remove the front lens cap. (Fig. C)

Removing the lens from the camera

Turn the camera off.
Press and hold the lens release button on the
camera while turning the lens clockwise.

Advertising
This manual is related to the following products: